2006 Bombardier Outlander Max Series Factory Service Manual, Page 250Get this manual
Section 06 ELECTRICAL SYSTEM Subsection 05 (LIGHTS, INSTRUMENTS AND ACCESSORIES)
Outlander 800 Series
Speedometer Pinout
FUIlCTION Power 12 Vdc Ground CAN line CAN line Fuel level gauge supply Fuel level gauge ground 24WD switch signal HI beam signal PIN 11 23 24 15 12 17 16
Voltage Test
QUICK CHECK OBSERVATION POSSIBLE CAUSE Burnt fuse (F8) Faulty relay (main) Burnt fuse (F4) ECM not poweredmulti-function speedometer does not turn on burnt fuse (F6) defective diode (D1) defective ECM
If there is no voltage, recheck voltage as followsSPEEDOIVIETER CONNECTOR (harness side) Pin VOLTAGE Battery voltage