2006 Bombardier Outlander Max Series Factory Service Manual, Page 237Get this manual
I:Section 06 ELECTRICAL SYSTEM Subsection 03 (STARTING SYSTEM) For the following test, we do not want the engine to run Set ECM in engine drowned mode as follows:Depress and hold throttle lever at full throttle position- Install rubber band or some tape to maintain throttle lever in this position while testingDepress start button and while engine is cranking, measure the voltage drop as follows with multimeterSOLENOID CONNECTOR
PIN Post coming from battery
WARNING
Always disconnect BLACK (-) cable first and reconnect lastRemove the RH side cover and the engine cover (refer to BODY)Disconnect RED (+) cable from starterClean starter areaRemove starter mount screw