2006 Bombardier Outlander Max Series Factory Service Manual, Page 234Get this manual
Section 06 ELECTRICAL SYSTEM Subsection 03 (STARTING SYSTEM)
If "INVALID KEY" is seen in speedometer display, ensure key is programmed for the vehicleRefer to DESS SYSTEMIf problem persists, check DESS key, ignition switch and stop switchRefer to IGNITION SYSTEM
ENGIIIE STOP SWITCH
First ensure ignition switch is in ON position and engine stop switch is RUN positionIf engine does not crank when pressing the start button, try starting while using brakeIf it is now working, test GBPS switch Refer to GEARBOXIf GBPS switch tests good, check the brake switchRefer to IGNITION SYSTEM
START SWITCH
If engine does not turn when pressing the start button, test the switch as followsA quick operation test can be done hicle communication kit (VCK) with software, using the Monitoring tabhicle's start button and look at the LEDusing the vethe B.U.D.SPress the veStart button
vmr 2006-Q 2().Q66_8
Replace multi-function switc if defectiveIf switch tests gooddisconnect ECM connector BTest cont inuity of wiring between start switch connector and ECM connector as follows