2006 Bombardier Outlander Max Series Factory Service Manual, Page 229Get this manual
Section 06 ELECTRICAL SYSTEM Subsection 03 (STARTING SYSTEM)
GENERAL
First ensure the problem is not related to engine mechanical componentsIf not, test the starting systemCauses of problems are not necessarily related to starter but may be due to burnt fuse, faulty battery, start button, ignition switch, engine stop switch, starting solenoid, electrical cables, connections or the electronic moduleCheck these components before removing starterConsult the STARTING SYSTEM TROUBLESHOOTING table above for general view of possible problems
IGNITION SWITCH
A quick test to check if it is functioning properlyTurn the ignition switch to the ON positionIf the headlamps turn on, the ignition switch is good Otherwise, refer to IGNITION SYSTEM for testing procedureIf it tests good, continue the next tests
ENGINE STOP SWITCH
If engine does not crank when placing engine stop switch to RUN and pressing the start button, test the engine stop switch as followsRemove the console (refer to BODY) and unplug the multi-function switch connectorUsing multimeter, measure the resistance between the following wiresPOSITION Switch to OFF WIRE BLACK and BLACKWHITE RESISTANCE 1