2006 Bombardier Outlander Max Series Factory Service Manual, Page 209Get this manual
Section 06 ELECTRICAL SYSTEM Subsection 01 (CHARGING SYSTEM)
Insert either meter test probe onto AC-1 and ground the other meter test probe to the engine or the stator iron core and note the reading There should be no continuity (infinity) between the stator insulated coils and groundIf there is reading, the stator coils andor the wiring from the coils is grounded and needs to be replacedrepaired respectively
V07G05A
TYPICAL
- Place either meter test probe into the remaining stator lead (AC-3) and note the resistanceIf the readings are out of specification, the stator will need to be replacedV07G07A
TYPICAL