2006 Bombardier Outlander Max Series Factory Service Manual, Page 199Get this manual
Section 05 FUEL SYSTEM Subsection 02 (CARBURETOR)
Refer to following photos fo prope float level gauge positioning and adjust float level to 10 mm 0.5 mm (.39 in .02 in)
- Reinstall throttle and choke cables, at the same time adjust the throttle cable, then install the side cove rRefe to CARBURETOR ADJUSTMENTS bel ow in th is sectionReinstall carburetor on veh icleWhen reinstalling carbu retor on vehicle, pay attention to the following :
CAUTION: The rubber flanges must be checked for cracks andor damageAt assembly, the rubber flanges must be perfectly matched with the air box, carburetor and engine or severe engine damage will occurDo not use screwdriver or other tool to install the rubber flangesMake sure rubber flange re cess is aligned with intake adaptor notch