2006 Bombardier Outlander Max Series Factory Service Manual, Page 186Get this manual
Section 05 FUEL SYSTEM Subsection 01 (FUEL TANK AND FUEL PUMP)
FUEL DELIVERY SYSTEM DIAGNOSTIC FLOW CHART
Fuel pump does not run
- Check fuses and relays- Check ignition switch and engine stop switch- Check fuel pump operation- Repair or replace if necessary
Turn ignition key ON and set engine stop switch to RUN
Install fuel pressure gauge on fuel pressure line
Fuel pump runs for secthen stops
Turn ignition key ON and set engine stop switch to RUN
Replace fuel pump module
Repair or replace
Fuel pressure less than 350 kPa (51 PSI)
Fuel pump runs
Check fuel line rail for leaks