2006 Bombardier Outlander Max Series Factory Service Manual, Page 173Get this manual
Section 04 ENGINE MANAGEMENT (V-810) Subsection 03 (COMPONENT INSPECTION, REPLACEMENT AND ADJUSTMENT)
CTS SENSOR PIN
MEASUREMENT RESISTANCE 20C (68F)
Install the new CTS and torqu to 16 N-m (141 Ibf-in)Reinstall remaining removed parts Refill and bleed the cooling system, refer to COOLING SYSTEM subsection
22802740
OIL PRESSURE SWITCH (OPS)
If resistance is out of specification, replace the CTSIf resistance tests good,reconnect the CTS and disconnect the ECM connector from the ECMUsing multimeter, recheck resistance on the ECM connector as per tableECM CONNECTOR PIN MEASUREMENT RESISTANCE 20C (68F)