2006 Bombardier Outlander Max Series Factory Service Manual, Page 170Get this manual
Section 04 ENGINE MANAGEMENT (V-810) Subsection 03 (COMPONENT INSPECTION, REPLACEMENT AND ADJUSTMENT)
If the voltage is not good, replace the CAPS
Replacement
Unscrew the retaining screw and replace the CAPSEnsure to reinsta ll O-ring
R1503motrl84A
CAPS PIN-OUT
1CAPS 2Retaining screw
Apply Loctite 243 (PIN 293 800 060) on thread and torque to 10 N-m (89 Ibf-in)
MANIFOLD AIR PRESSURE AND TEMPERATURE SENSOR (MAPTS)