2006 Bombardier Outlander Max Series Factory Service Manual, Page 162Get this manual
Section 04 ENGINE MANAGEMENT (V-810) Subsection 03 (COMPONENT INSPECTION, REPLACEMENT AND ADJUSTMENT)
If ECM is now WORKING, replace relayIf ECM is NOT working, chec diode D1 as followsCheck diode installation as shown
vmr2006-020-006_s
MUST BE OPEN CIRCUIT
1Position symbol on diode in same direc tion as symbol on fuse holder
Remove diode and lay down on non-metallic ta bleSet multimeter as shown
MUST BE AROUND 0.5 V
If diode fail any test, replace itPROBLEMS RELATED TO DIODE D1