2006 Bombardier Outlander Max Series Factory Service Manual, Page 147Get this manual
Section 04 ENGINE MANAGEMENT (V-810) Subsection 02 (DIAGNOSTIC PROCEDURE)
DESCRIPTION
ENGINE REACTION
DESCRIPTION OF LIMP HOME EFFECT
Throttle position sensor adaptation failure Throttle position sensor adaptation failure High temp
Wrong throttle body mechanical position during reset of closed TPS or no initialization after ECM replacement Wrong throttle body mechanical position during reset of closed TPS or no initialization after ECM replacement High temperature of the cooling liquid TPS adaptation failure, TPS failure, damaged ECM memory or battery voltage out of rangeLow oil level, engine leak, oil pump failure, damaged sensor, damaged or shorted circuit wires
Check cable adjustmentCheck idle stop for wearMake sure throttle plate is against throttle stopReset closed TPS Check cable adjustmentCheck idle stop for wearMake sure throttle plate is against throttle stopReset closed TPSRefer to SERVICE MANUAL for high engine temperatureCheck cable adjustmentCheck idle stop for wearMake sure throttle plate is against throttle stopReset closed TPSCheck oil levelCheck oil pressure switch resistanceWith engine stopped, the resistance should be less tha ohmWith engine running, the resistance of oil switch shou ld be infinitely high (OL) Check system circuit 2-A-1O to engine groundCheck oil leve lCheck oil pressure switch resistanceWith engine stopped, the resistance should be less than ohmWith engine running, the resistance of oil switch should be infinitely high (OL Check system circuit 2-A-l to engine groundRefer to SERVICE MANUAL for low oil serviceCheck system circuits 2-8-38, and 2-8-39 with l-CC-C and l-CC-DCheck system circuits 2-8-38, and 2-8-39 with l-CC-C and l-CC-O