2006 Bombardier Outlander Max Series Factory Service Manual, Page 143Get this manual
Section 04 ENGINE MANAGEMENT (V-810) Subsection 02 (DIAGNOSTIC PROCEDURE)
DESCRIPTION
Cylinder #1 injector open circuit or shorted to ground
Blown fuse, damaged or disconnected injector, damaged or disconnected circuit wires, damaged ECM output pins
Check fuse FlCheck connections on injectorCheck for approximately 14.5 ohms on injector, Check system circuit 2-A-15Check connector CJ connecting the two harnesses togetherCheck for approximately 14.5 ohms on injector, Check if system circuit 2-A-15 is shorted to 12 VCheck fuse F1Check connections on injectorCheck for approximately 14.5 ohms on injectorCheck system circuit 2-A-33Check connector CJ connecting the two harnesses together, Check for approximately 14.5 ohms on injectorCheck if system circuit 2-A-33 is shorted to 12 VCheck for metal deposit on sensorCheck circuit between 2-A-5, 2-A-19 and 4-CPS-1,4-CPS-2 Replace sensor if necessaryCheck for meta deposit on sensorCheck circuit between 2-A-5, 2-A-19 and 4-CPS-1, 4-CPS-2Replace sensor if necessary, Check for metal deposit on sensorCheck circuit between 2-A-5, 2-A-19 and 4-CPS-1,4-CPS-2Replace sensor if necessaryCheck fuse F4Check for 12 volts between sensor's connector pins and 3Check system circuits 2-A-20, 2-A-34 and F4