2006 Bombardier Outlander Max Series Factory Service Manual, Page 132Get this manual
Section 04 ENGINE MANAGEMENT (V-810) Subsection 01 (OVERVIEW)
ENGINE MANAGEMENT SYSTEM
The EMS calculates the proper airfuel mixture and ignition timing for each cylinder separatelyThe ECM is the central point of the engine management system It reads the inputs, makes computations, uses pre-determined parameters and sends the proper signals to the outputs for proper engine management
ELECTRONIC FUEL INJECTION
The ECM reads the signals from different sensors which indicate engine operating conditions at millisecond intervalsSignals from sensors are used by the ECM to determine the injection parameters (fuel maps) required for optimum air-fuel ratio The CPS, the MAPTS and the TPS are the primary sensors used to control the injection and ignition timingOther sensors (like temperature sensors, etc are used for secondary input'1011 2006-012 OIJ b
Ign ition coil loca tion