2006 Bombardier Outlander Max Series Factory Service Manual, Page 105Get this manual
Section 03 ENGINE SYSTEM Subsection 04 (EXHAUST SYSTEM)
Remove exhaust gasket no10 from engine exhaust port
Installation
Install new exhaust gasket on "Y" exhaust pipe endSecure "Y" exhaust pipe on cylinder head with exhaust nutsDo not torque yet1Y exhaust pipe ball socket
Torque exhaust nuts to 13 N-m (115 Ibf-in)Install all other removed parts
Make sure "Y" exhaust pipe end is properly aligned with the end of front exhaust pipeInstall exhaust springsTorque exhaust nuts to 13 N-m (115 Ibf-in)Install muffler and all other removed parts
"Y" EXHAUST PIPE
Inspection
Check for cracks, bending or other damagesReplace if necessary
FUEL TANK PROTECTOR
Inspection
Check for wear, cracks or other damagesplace if necessaryRe-