2006 Bombardier Outlander Max Series Factory Service Manual, Page 101Get this manual
Section 03 ENGINE SYSTEM Subsection 04 (EXHAUST SYSTEM)
Remove external heat shield no10, Formed Heat Shield Remove the muffler no6, Unscrew bolts no12 retaining formed heat shield no13 to muffler tube,
TYPICAL 1, uffler support 2, Bolt
Slide the muffler support no8 on the muffler rod to remove it
NOTE: Two sleeves (one of each side) are inserted into muffler support arms, Pay attenti on not to loose th em,
xoooooo TYPICAL 1, Formed hea shield 2, uffler tube
Inspection
Check if the heat shields are cracked or damaged, Replace it if necessary,