2006 Bombardier Outlander Max Series Factory Service Manual, Page 82Get this manual
Section 03 ENGINE SYSTEM Subsection 02 (LUBRICATION SYSTEM)
Inspection
Check oil filter cover a-ring, change it if necessaryCheck and clean the oil filter inlet and outlet area for dirt and other contaminations
OUTLANDER 800 SERIES GENERAL
Prior to change the oil, ensure vehicle is on level surface Oil and oil filter must be replaced at the same timeOil change and oil filter replacement should be done with warm engine
& WARNING
The engine oil can be very hotWait until engine oil is warmDispose oil and filter as per your local environmental regulations
PROCEDURES
R400motr112A