2006 Bombardier Outlander Max Series Factory Service Manual, Page 61Get this manual
Section 02 TROUBLESHOOTING Subsection 02 (TROUBLESHOOTING CHART)
SYMPTOM
CONDITION
DRIVE PULLEY NOISE IN IDLE SPEEDNORMAL USE4Check drive pulley screw for torqueaLoose screwRetighten screw with recommended torque5Chec one-way clutch condit ion on drive pulley sliding halfaBearing(s) do(es) not move freelyReplace damaged part(s) and lubricate inside of one-way clutch (refer to CV7 bSpring sleeve(s) inside one-way clutch is (are) worn outReplace both sleeves and springs and lubricate inside of one-way clutch (refer to CV7) cSpring(s) inside one-way clutch is (are) worn outReplace both pins and springs and lubricate inside of one-way clutch (refer to CVn
SYMPTOM
CONDITION
DRIVE PULLEY NOISE WHEN ACCELERATINGDECELERATINGNORMAL USE 1Check items to of drive pulley noise in idle speed 2Check if belt run in dry conditions aDrive pulley area is wetcontaminated due to wate rdirt intrusion Clean driven pulley area andor drai water out of CVT cover3Check drivedriven pulley screw for torqueaLoose screw on drive andor driven pulleyRetighten screw with recommended torque4Chec cam and driven pulley fixed half for wearaCam andor drive pulley fixed half out of wear limit andor damaged Replace damaged part(s)