2006 Bombardier Outlander Max Series Factory Service Manual, Page 46Get this manual
Section 02 TROUBLESHOOTING Subsection 01 (TROUBLESHOOTING CHART)
SYMPTOM
CONDITION
BELT DISINTEGRATIONNORMAL USE1 Check drive belt identification numberaExcessive belt speedUsing unspecified type of beltReplace belt with proper type of belt (refer to TECHNICAL DATA) 2Check if pulley halves are cleanaOil on pulley surfacesClean pulley surfaces with fine emery cloth and wipe clean using Pulley Flange Cleaner (PN 413 711 809) and clothbDrivedriven pulley halves are damaged through stones inside CVT areaClean pulley surfaces with fine emery cloth, wipe clean with cloth or replace drivedriven pulley halves and belt
TestInspection
SYMPTOM
CONDITION
FLEX CRACKS BETWEEN COGSNORMAL USE1 Check drive belt condition aConsiderable use, belt wearing outReplace bBrittle belt condition through agingReplace belt
TestInspection