2005-2007 Bombardier Rally 200 Factory Service Manual, Page 278Get this manual
Section 10 TECHNICAL DATA Subsection 01 (TECHNICAL DATA)
RALLY 200
VEHICLE MODEL ENGINE Engine type Starting system Number of cylinder(s) Number of valves Bore Stroke Displacement Compression ratio Air filter type Exhaust system Intake valve opening Intake valve closing Exhaust valve opening Exhaust valve closing Valve clearance Intake Exhaust Intake Exhaust New Wear limit New Wear limit Wear limit New nominal Service limit Intake Valve seat contact width Exhaust Piston measurement Pistoncylinder clearance New Wear limit New Wear limit New Wear limit New nominal Wear limit mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) 1st Piston ring type 2nd 3rd Type Spark arrester Standard mm (in) mm (in) cm3 (in3) 0.4 stroke, Over Head Camshaft (OHC), liquid cooled Electric valves with mechanical adjustment 62 (2.4) 58.4 (2.3) 176.3 (10.8) 11.3:1 stage foam filter Single output USDA Forest Service approved 13.00 BTDC 43.00 ABDC 48.00 BBDC 8.00 ATDC 0.05 to 0.09 (.0019 to .0035) 0.10 to 0.14 (.0040 to .0055) 0.035 to 0.050 (.0014 to .0019) 0.140 (.0055) 0.045 to 0.060 (.0018 to .0024) 0.140 (.0055) 4.06 (.16) 33.6 (1.323) 33.4 (1.315) 1.05 to 1.35 (.041 to .053) 1.6 (.063) 1.25 to 1.55 (.049 to .061) 1.8 (.070) 61.942 to 61.958 (2.4386 to 2.4393) 61.930 (2.4382) 0.042 to 0.072 (.0016 to .0028) 0.100 (.0039) Upper compression ring Lower compression ring Oil scraper ring RALLY 200