2005-2007 Bombardier Rally 200 Factory Service Manual, Page 260Get this manual
Section 08 BRAKES Subsection 01 (HYDRAULIC BRAKES)
NOTE: Make sure that rubber boots are correctly installed in slide pins groovesInstall pad spring, caliper bracket and pads
Installation
For the installation, reverse the removal procedure, pay attention to the following detailsUse new sealing washers when installing Banjo bolt retaining brake hose to caliperOn front caliper, if the replacement of caliper screws no15 is necessary, replace the screws with another having the same lengthCAUTION: Installing longer bolts can damage brake disc and front brake assembly
Front Brake Pads Raise vehicle and support it securelyRemove appropriate wheelRemove caliper from knuckleCAUTION: Do not let the caliper hang by the hose and do not stretch or twist the hoseUsing flat screwdriver, move pads no19 apartPush slide pins then remove pads