2005-2007 Bombardier Rally 200 Factory Service Manual, Page 240Get this manual
Section 07 SUSPENSION Subsection 01 (FRONT SUSPENSION)
GENERAL
During assemblyinstallation, use the torque values and service products as in the exploded viewsClean threads before applying threadlockerRefer to SELF-LOCKING FASTENERS and LOCTITE APPLICATION at the beginning of this manual for complete procedure2
WARNING
Torque wrench tightening specifications must strictly be adhered toLocking devices (ex locking tabs, elastic stop nuts, self-locking fasteners, cotter pin, etc must be installed or replaced with new ones where specifiedIf the efficiency of locking device is impaired, it must be renewedV06J0iA
1Remove bolts 2Front shock assembly
FRONT SHOCK
Adjustment
Spring preload may vary from rider to rider depending upon their weightPreload can be changed by setting the two adjusting nuts no1 up or down to compress the spring no2 to different lengthsShortening or lengthening the spring length will increase or decrease the preload