2005-2007 Bombardier Rally 200 Factory Service Manual, Page 189Get this manual
Section 04 ELECTRICAL Subsection 03 (STARTING SYSTEM)
Clean battery casing and caps using solution of baking soda and waterDo not allow cleaning solution to flow into the battery, otherwise it will destroy the electrolyteRinse battery with clear water and dry well using clean clothStore battery on wooden shelf in cool dry placeSuch conditions reduce self-discharging and keep fluid evaporation to minimumDuring the storage period, recheck electrolyte level and specific gravity readings at least every 40 daysAs necessary, keep the battery at its upper level line and near full charge as possible (trickle charge)
ACTIVATION OF NEW BATTERY
WARNING
Never charge or boost battery while installed on vehicleCAUTION: Prior to charging the battery, always remove it from the vehicle to prevent electrolyte spillage onto partsA new battery is factory fresh dry chargedFor storage purposes, it is fitted with temporary sealing tubeDo not remove the sealing tube or loosen battery caps unless activation is desiredIn case of accidental premature removal of caps or sealing tube, battery should be given full chargePerform the following operations when new battery is to be installed Remove the sealing tube from the vent elbowInstall vent tube, included in the battery kit, to battery elbow