2005-2007 Bombardier Rally 200 Factory Service Manual, Page 171Get this manual
Section 03 FUEL SYSTEM Subsection 02 (CARBURETOR)
Place the cable in vertical position during approximately 15 minutes or until no lubricant flows out of cableReinstall and adjust cable, see below
Installation
For installation, reverse the removal procedure1 2
V06F0GA
Adjustment WARNING
Ensure the key is turned OFF, prior to perform the throttle cable adjustmentSlide rubber protector back to expose throttle cable adjusterLoosen lock nut then turn the adjuster to obtain correct throttle lever free playNOTE: Measure throttle free play at the tip of throttle leverTighten lock nut and reinstall protector
Throttle cable Valve piston Carburetor cap Carburetor spring
Pull cable out of carburetorThrottle Lever Side Remove both screws on throttle housingRemove throttle cable