2005-2007 Bombardier Rally 200 Factory Service Manual, Page 170Get this manual
Section 03 FUEL SYSTEM Subsection 02 (CARBURETOR)
Adjust throttle cable
CARBURETOR ADJUSTMENTS
Pilot Screw Preliminary Adjustment
NOTE: The pilot screw no7 is factory presetAdjustment is not necessary unless the carburetor is overhauled or replacedCompletely close the pilot screw (until slight seating resistance is felt) then back off as specifiedRefer to TECHNICAL DATA for specifications
Pilot Screw Adjustment
NOTE: Warm up the engine to operating temperatureTurn the pilot screw clockwise until it sits lightly then unscrew of 34 turn
1Idle speed screw
To perform good adjustment, use the ESI 585 deluxe automotive meter or an equivalentCAUTION: Do not attempt to set the idle speed by using the pilot screwRefer to TECHNICAL DATA for idle speed specifications