2005-2007 Bombardier Rally 200 Factory Service Manual, Page 164Get this manual
Section 03 FUEL SYSTEM Subsection 01 (FUEL CIRCUIT)
Pressurize fuel system to 21 kPa (3 PSI)That pressure must not drop during minutesIf pressure drops, locate fuel leak(s) and repairreplace leaking component(s)To ease locating leak(s) at fuel tank vent fitting, fuel gauge or fuel cap spray soapy water on components; bubbles will indicate leak location(s)V06F0TA
FUEL VALVE
Removal
Remove LH side cover (refer to BODY)Drain fuel tank, refer to FUEL TANK DRAININGUnscrew the bolts no3 retaining fuel valve no2 to fuel tank no12
1Fuel tank 2Bolts
Inspection
Inspect fuel tank for any damage or cracks which may result in fuel leaksIf so, replace tank with new one