2005-2007 Bombardier Rally 200 Factory Service Manual, Page 158Get this manual
Section 02 ENGINE Subsection 10 (CONSTANT VELOCITY TRANSMISSION (CVT))
LINING THICKNESS NOMINAL (new) SERVICE LIMIT 2.50 mm to 4.50 mm (.0984 in to .1772 in) 1.00 mm (.0394 in)
Check lining thickness of friction platesIf these plates are worn out, the gear shift will become difficult since the dogs of shifting gear inside gearbox are touching the gearReplace all friction plates if necessary
R175motr55A
1Nut AWearing diameter
NUT OUTSIDE DIAMETER NOMINAL SERVICE LIMIT 16.980 to 16.991 mm (.6685 to .6689 in) 16.880 mm (.6646 in)
V06E0FA
1Friction plate
Centrifugal Clutch Check levers on centrifugal clutch no19 for free movement and lining wearNOTE: When lining thickness is getting less, higher RPM is needed for centrifugal clutch engagement4 3