2005-2007 Bombardier Rally 200 Factory Service Manual, Page 131Get this manual
Section 02 ENGINE Subsection 08 (CRANKSHAFT)
OIL SEAL
Removal
The oil seal no14 can be removed easily with screwdriverJust pry the oil seal out of its location
PLAIN BEARING
Removal
Support the crankcase housing properly during bearing removal and installationHousing damages may occur if this procedure is not performed correctlyMark plain bearing oil bore position together with crankcase thrust surfaceWARNING
Be careful, do not scratch the oil seal location or damage the housing
Installation