2005-2007 Bombardier Rally 200 Factory Service Manual, Page 109Get this manual
Section 02 ENGINE Subsection 07 (CYLINDER AND HEAD)
Removal
Remove valve springPush valve stem then pull valves no31 and no32 out of valve guide no332 1
Inspection
Valve Stem Seal Inspection of valve stem seals is not needed because new seals should always be installed whenever cylinder head is removedValve Inspect valve surface, check for abnormal stem wear and bendingIf out of specification, replace by new oneVALVE OUT OF ROUND NOMINAL (new) Exhaust Intake Exhaust Intake 0.005 mm (.0002 in) SERVICE LIMIT 0.06 mm (.0024 in)