2005-2007 Bombardier Rally 200 Factory Service Manual, Page 70Get this manual
Section 02 ENGINE Subsection 04 (COOLING SYSTEM)
CAUTION: To prevent leaking, take care that the O-rings are exactly in grooves when you reinstall the water pump housingApply Loctite 243 (blue) (PN 293 800 060) on the threads of the screw no23 retaining the housingInstall the screw then torque it to Nm (53 lbfin)Install thrust washer no22, needle pin no21, water pump gear no19 and washer no181 3
Installation
Push oil seals in place by using the insertion jig handle (PN 420 877 650) and the oil seal pusher (PN 529 035 849) as per following procedure:
420 877 650
529 035 849
Install inner oil seal no4 by using spacer on the oil seal pusherThe sealing lip has to point towards water pump gear2 3