2005-2007 Bombardier Rally 200 Factory Service Manual, Page 65Get this manual
Section 02 ENGINE Subsection 04 (COOLING SYSTEM)
DRAINING THE SYSTEM
WARNING
In order to avoid getting burned, never drain or refill cooling system when engine is hotRemove the front fenderRefer to BODYRemove the radiator capTo drain cooling system, partially unscrew cooling drain plug no6 on the left side of engine and drain the coolant into suitable container
Coolant Replacement Procedure WARNING
In order to avoid getting burned, do not remove or loosen the radiator cap or the engine drain plug when the engine is hotDrain the system completely (see procedure above)Pinch engine outlet hose no8 between radiator and thermostat housing with large hose pincher (PN 529 032 500)V06C3XA
1Cooling drain plug
CAUTION: If the drain plug is removed completely, pay attention to the gasket ring no7When cooling system is drained completely, screw the cooling drain plug