2005-2007 Bombardier Rally 200 Factory Service Manual, Page 41Get this manual
Section 02 ENGINE Subsection 01 (TROUBLESHOOTING)
BELT WORN EXCESSIVELY IN TOP WIDTH(CONT'D)
3Check drive belt width- Considerable wearReplace belt if less than specified (refer to CVT or TECHNICAL DATA)
BELT SIDES WORN CONCAVE1Check pulley half surfaces- Rough or scratched pulley half surfacesRepair or replace2Check drive belt identification number- Unspecified type of beltReplace belt with an appropriate drive belt (refer to TECHNICAL DATA)
BELT DISINTEGRATION1Check drive belt identification number- Excessive belt speedUsing unspecified type of beltReplace belt with proper type of belt (refer to TECHNICAL DATA)2Check if pulley halves are clean- Oil on pulley surfacesClean pulley surfaces with fine emery cloth and wipe clean using Pulley Flange Cleaner (PN 413 711 809) and cloth
FLEX CRACKS BETWEEN COGS1Check drive belt condition- Considerable use, belt wearing outReplace