2005-2007 Bombardier Rally 200 Factory Service Manual, Page 19Get this manual
INTRODUCTION
TIGHTENING TORQUES
Tighten fasteners to torque mentioned in exploded views andor text, When they are not specified, refer to following table
WARNING
Torque wrench tightening specifications must strictly be adhered toLocking devices (ex locking tabs, elastic stop nuts, self-locking fasteners, etc must be installed or replaced with new ones, where specifiedIf the efficiency of locking device is impaired, it must be renewedIn order to avoid poor assembling, tighten screws, bolts or nuts in accordance with the following procedure: Manually screw all screws, bolts andor nuts Apply the half of the recommended torque valueCAUTION: Be sure to use the proper tightening torque for the proper strength gradeNOTE: When possible, always apply torque on the nut Torque to the recommended torque valueNOTE: Always torque screws, bolts andor nuts in criss-cross sequence4.8 Property class and head mar ings 4.8 4.8 8.8 8.8 8.8 10 10 9.8 9.8 9.8 10.9 10.9 10.9 10 10 12.9 12.9 12 12