2005-2007 Bombardier Rally 200 Factory Service Manual, Page 17Get this manual
INTRODUCTION
Blind Holes
Install stud Install cover, etc Apply drops of proper strength Loctite on uncovered threads Tighten nuts as requiredAdjusting Screw
A00A3MA
1On threads 2On threads and at the bottom of hole
Clean threads (bolt and hole) with solvent Apply Loctite Primer (PN 293 800 041) on threads (bolt and nut) and allow to dry for 30 seconds Choose proper strength Loctite threadlocker Apply several drops along the threaded hole and at the bottom of the hole Apply several drops on bolt threads Tighten as requiredStud in Blind Holes
A00A3PA
1Apply here 2Plunger