2004 Bombardier Rally 200 Series Shop Manual, Page 272Get this manual
Section 10 BODYFRAME Subsection 02 (BODY)
Installation
Installation is the reverse order of the removal
To remove decal; heat old decal with heat gun and peel off slowlyUsing isopropyl alcohol, clean the surface and dry thoroughlyApply liquid soap to new decal and carefully position the decalUsing sponge or squeegee, remove the air bubbles and surplus water working from the center toward the edgesAllow to air dryCAUTION: Do not apply isopropyl alcohol or solvent directly on decalsUse only in well ventilated area