2004 Bombardier Rally 200 Series Shop Manual, Page 269Get this manual
Section 10 BODYFRAME Subsection 02 (BODY)
Seat Cover Replacement
Remove the old seat coverCheck the foam and replace if necessaryInstall staples with an electric tacker such as Arrow tacker noETN-50 or with manual tacker such as Arrow tacker noT-50NOTE: For an easier installation, it's highly recommended to use an electric tackerEnsure that the seat rest firmly against hard surface such as piece of woodThis is done to get the staples completely pushed in place
CONSOLE COVER
Removal
Pull out the console cover no7 to release its pins from oblong washers (rubber grommet)
V06L0BA
1Console cover 2Oblong washers
Installation
The installation is the reverse of removal procedure
CONSOLE
Removal
NOTE: Console cover no7 and cup no8 must be removed before removing the console no9Console is retained by two rubber latches no10 and plastic rivets no1Unlatch the console and remove the plastic rivetsUnplug the electric connections (indicator lights and ignition switch) from the console to remove it completely from the vehicleF01L3YA