2004 Bombardier Rally 200 Series Shop Manual, Page 252Get this manual
Section 08 SUSPENSION Subsection 03 (REAR SUSPENSION)
Check busings no11 and cushions no12 for wear or damagesReplace if necessaryCheck if the O-rings no13 are brittle, hard or otherwise damaged
Installation
Installation is the reverse of removal procedureHowever, pay attention to the following detailsInsert O-rings no13 in the groove into framePlace cushions no12 and bushings no11 then install the swing armInstall the swing arm bolt no9 with washers no14 then push the O-rings no13 between frame and bushings
V06H03A
Drive chain Adjuster lock Sprocket hub Chain tensioner
Slack drive chainRemove rear brake (refer to BRAKES)Remove swing arm bolt no9 and its two nuts no10Remove chain roller
V06J04B