2004 Bombardier Rally 200 Series Shop Manual, Page 232Get this manual
Section 06 DRIVE TRAIN Subsection 03 (REAR AXLE)
Installation
For installation, reverse the removal procedureREAR AXLE
Removal
Lift rear of vehicle and install jack stands under the frame to support the rear of vehicle out off the groundRemove rear wheelsRemove the LH and RH wheel hubs no11Apply rear brakeRemove locking nuts no12Unscrew the chain tensioner lock bolts no2Release rear brakeInstall adjuster lock and release drive chain tensionRemove drive chain from rear sprocketSlide out the axle from the right side of the chain tensioner no4If the vehicle was used with failed bearings, many parts around the bearing area may be damagedIt is possible that the axle will not slide out easily if the bearings are seized on it
V06H0CA
1Retainer ring
Remove retainer ring no15 and pull out the rear sprocket no5 out with rear sprocket hub no3
Inspection