2004 Bombardier Rally 200 Series Shop Manual, Page 220Get this manual
Section 05 ELECTRICAL Subsection 06 (INSTRUMENTS AND ACCESSORIES)
Push bulb in and hold while turning counterclockwise to releaseInstall the new bulb by first pushing in while turning clockwise
Replacement
Remove the dash boardUnplug wires on indicator lampPress both tabs then pull indicator lamp out of hole
IGNITION SWITCH
Refer to IGNITION SYSTEM
Removal
Lift the dash board and unscrew the ignition switch nutNOTE: Do not unplug connectors when steering cover is liftedUnplug the switch connector
V02A0FA
Installation
For installation, reverse the removal procedure