2004 Bombardier Rally 200 Series Shop Manual, Page 209Get this manual
Section 05 ELECTRICAL Subsection 04 (STARTING SYSTEM)
STARTING SYSTEM TESTS GENERAL
First ensure the problem is not related to engine mechanical componentsCauses of troubles are not necessarily related to starter but may be due to burnt fuse (main), faulty battery, start button, ignition switch, engine stop switch, starting solenoid, electrical cables or connectionsCheck these components before removing starterConsult also the STARTING SYSTEM TROUBLESHOOTING table above for general view of possible problems
If solenoid test good, check the electric starterIf starter test good, the NEUTRAL switch can be suspected
Ignition Switch
A quick test to validate it is workingTurn the ignition switch ONIf the lights turn on, the ignition switch is goodOtherwise, refer to IGNITION SYSTEM, for testing procedureIf it tests good, continue the next tests
Engine Stop Switch
If engine does not start when placing engine stop switch to RUN and pressing the start button, test the engine stop switch as followsRemove the steering cover and unplug the multifunction switch connectorUsing multimeter, measure the resistance between the following wiresPOSITION Switch to OFF Switch to RUN WIRE BLACK and BLACKWHITE RESISTANCE maxInfinite (0.L)