2004 Bombardier Rally 200 Series Shop Manual, Page 175Get this manual
Section 03 ENGINE Subsection 11 (CVT)
R175motr58A R175motr47A
1Lock washer 2Driven pulley nut
1Driven pulley outer half against clutch assembly 2Crankshaft locking bolt
withdraw clutch drum no17
Disassembly of Driven Pulley
NOTE: The following procedure is not necessary except if clutch no18 must be removedRefer to Inspection before proceedRemove: nut no19 as per following procedureFix driven pulley support (PN 529 035 863) in vise and place driven pulley assembly4 3