2004 Bombardier Rally 200 Series Shop Manual, Page 134Get this manual
Section 03 ENGINE Subsection 08 (CYLINDER AND HEAD)
Installation
For installation, reverse the removal procedurePay attention to the following detailsCAUTION: Make sure the thrust washer no34 is installed before installing valve stem seal no35Apply engine oil on valve stem and install itCAUTION: Be careful when valve stem is passed through sealing lips of valve stem seal2 1
Using valve guide remover (PN 529 035 852), remove valve guide no36
R175motr90A
1Valve guide remover 2Valve guide 3Hammer
Inspection
Always replace valve stem seals whenever cylinder head is removedClean the valve guide bore before reinstalling the valve guide into cylinder head
R610motr129A
1Thrust washer 2Sealing lips of valve stem seal