2004 Bombardier Rally 200 Series Shop Manual, Page 96Get this manual
Section 03 ENGINE Subsection 05 (COOLING SYSTEM)
Installation
The installation is the opposite of the removal procedurePay attention to the following detailsCAUTION: Be careful not to damage impeller wings during installationNOTE: Fix water pump shaft in vise and use the vise jaw protectors to avoid damaging the water pump shaft no18
WATER PUMP SHAFT
Removal
Remove: water pump housing no15 (refer to WATER PUMP HOUSING above) impeller no17 together with water pump shaft no182
V06C14A
1Engine outlet hose 2Engine inlet hose
Inspection
Water pump shaft must rotate freelyOtherwise, replace itNOTE: When removing water pump shaft, always replace together retaining ring, oil seals, water pump shaft with new parts
overflow hose no21 mounting bolts on the top of radiator