2004 Bombardier Rally 200 Series Shop Manual, Page 86Get this manual
Section 03 ENGINE Subsection 04 (REMOVAL AND INSTALLATION)
On cylinder head side, install new gasket no13 on the exhaust pipe end then tighten the exhaust pipe on cylinder headTighten exhaust pipe clamp no9
Inspection
Check muffler for cracks or other damagesReplace if necessaryCheck if rubber bushings no16 are brittle, hard, cracked or otherwise damaged, change them if necessary
MUFFLER
Removal
Remove cotter pin no14 and washer no15Unscrew the clamp no9Remove muffler no10