2004 Bombardier Rally 200 Series Shop Manual, Page 84Get this manual
Section 03 ENGINE Subsection 04 (REMOVAL AND INSTALLATION)
On right side of vehicle, do the following: Connect: neutral and reverse switches
Before starting the engine, remove spark plug and ground it on engine or frameRun starter about thirty secondsThis operation will activate the oil pumpReinstall spark plugPlace transmission lever no7 on NEUTRAL positionStart vehicleSet carburetorStop engine and reverify if coolant and oil levels are correctAdjust drive chain (refer to REAR AXLE)Test drive to confirm all is working well
ENGINE SPROCKET
Removal
V06C1ZA
1Neutral switch YELLOWGREY 2Reverse switch VIOLETGREY