2004 Bombardier Quest/Traxter Series Shop Manual, Page 412Get this manual
Section 09 SUSPENSION Subsection 02 (FRONT SUSPENSION)
Remove cotter pin and castellated nut from upper ball joint no4
Installation
Position upper A-arm then install bolts and nutsDo not torque yetInstall bolt and nut retaining shock absorber to upper A-armTorque to 48 Nm (35 lbfft)Attach upper A-arm to knuckleInstall castellated nut and torque to 45 Nm (33 lbfft)NOTE: Make sure the conic sections are clean (without grease or oil)Install new cotter pinBoth ends of cotter pin must be foldedTorque upper A-arm to 63 Nm (46 lbfft)Secure brake hose to upper A-armInstall wheel(s)NOTE: Do not interchange left and right tiresThe tires are directional and their rotation must be kept in specific direction for proper operation