2004 Bombardier Quest/Traxter Series Shop Manual, Page 364Get this manual
Section 06 ELECTRICAL Subsection 07 (HYDRAULICELECTRIC SHIFT SYSTEM)
Task 3: Sensors and Solenoids Verification
The MPEM reads all main power supply outputs during operation of the vehicleIf any abnormality occurs, the MPEM will record the information in registryThe diagnostic components registry is displayed with the LED "Hi-Lo beam"The LED "Reverse" is ON during all the time the MPEM is verifying the diagnostic memoryEach abnormal component is represented by coded number (see table below) and each code number corresponds to the number of blinks that the LED "Hi-Lo beam" is doingWhen there are two or more abnormal items, the lowest coded numbered item is first indicated and delay of seconds separates each following codeWhen problem happens, all LEDs blink in the dashboard and will do so until the key switch is turned offThe corresponding registry is increased when problem happensAlways clear all codes and re-run vehicle to be sure code(s) will re-appearBLINK