2004 Bombardier Quest/Traxter Series Shop Manual, Page 350Get this manual
Section 06 ELECTRICAL Subsection 06 (INSTRUMENTS AND ACCESSORIES)
Removal
NOTE: Use the same procedure for RH or LH headlampUnplug the headlamp connectorRemove both screws under facia
Traxter Series
Replacement
Remove screw and lift up the sealed beam cover
V04G0EA
V01A02A
1Screws under facia
Remove both knobsRemove the last screw retaining headlamp holder
1Remove screws 2Lift up the sealed beam cover
Unplug sealed beam then remove itInstall the new oneProperly reinstall removed parts in the reverse order of their removal