2004 Bombardier Quest/Traxter Series Shop Manual, Page 209Get this manual
Section 04 ENGINE TRAXTER Subsection 02 (TROUBLESHOOTING)
MAGNETO SYSTEM
SYMPTOM CONDITION TestInspection NO SPARKNORMAL USE1Check spark plug electrode conditionaIncorrect gapReadjust gap (refer to TECHNICAL DATA)bSpark plug electrode is damagedReplace by Bombardier's recommended spark plug (refer to TECHNICAL DATA)cSpark plugs wet with fuelDry or replace2Check ignition coil for damage andor electrical failureaIgnition coil damagedReplace ignition coilbConnector is corroded or ignition coil shows electrical failureClean spark plug area and replace ignition coilcWire harness is brittle or hard (no connection)Replace3Check wire harness for cracks or other damagesaHarness shows electrical failure andor other damagesReplace wire harness4Check trigger coil for damage andor electrical failureaWindings of stator have electrical failureReplace magnetobConnector on trigger coil is damaged andor has electrical failureRepair and clean contacts of connector5Check electronic moduleaModule shows electrical failure or violent damagesReplace electronic modulebAMP connectors are corroded or they are not inserted or crimped correctlyClean, insert or crimp correctly and reconnect6Check spark plug cablesaDefective spark plug cablesReplace spark plug cablesbPoor contact between spark plug cable cap and the cableReplace spark plug cables