2004 Bombardier Quest/Traxter Series Shop Manual, Page 202Get this manual
Section 03 ENGINE QUEST Subsection 11 (CVT)
CAUTION: Do not use hammer, use press machine onlyCAUTION: Chamfer on inside diameter of the spacer must face engine side
R610tran37A
1Shaft 2Fixed half 3Press machine
R610motr247A
Install torque gear no26 then secure it with retaining ring no25
1O-ring 2Distance sleeve 3Chamfered area of distance sleeve
Install cam retainer no34 on main shaft end the right way then install cam no31