2004 Bombardier Quest/Traxter Series Shop Manual, Page 110Get this manual
Section 03 ENGINE QUEST Subsection 06 (MAGNETO SYSTEM)
Installation
NOTE: Never use oil in the press fit area of oil seal3 3
R610motr19A
1234567
Screws M6 130 Screws M6 45 Screws M8 65 Screws M6 25 Screws M8 25 Screws M6 45 with sealing ring Screws M6 130 with sealing ring
R610outi02A
Tightening sequence for screws on magneto housing cover is as per following illustration7 12
1Oil seal 2Oil seal installer (PN 529 035 758) 3Handle for insertion jig (PN 420 877 650)